Automotive · Aerospace · Marine · Industrial

Empowering Your Project Success

Home » Products » BMW G82 M4 Coupe Carbon Fiber Side Skirt Extensions
SKU ML-LQ185

BMW G82 M4 Coupe Carbon Fiber Side Skirt Extensions

MOQ: 10 pieces. Lead time is confirmed in the quote.

These extensions run along both rocker panels of the two-door G82 M4 Coupe.

BodyG82 M4 two-door coupe
SupplyLeft and right extensions
ConstructionCFRP
FinishGloss 3×3 twill
Overview

Side skirts for the two-door M4

Each extension follows the lower edge of the coupe’s original rocker panel. The long exposed face carries a continuous 3×3 carbon weave under gloss clear coat.

For cars with an exterior package, compare the side sill profile with the extension before fixing it. The part is supplied as a left and right set for the two-door body.

Applications

Where it is used

Coupe rocker detailing

Extend the visible line along both door sills.

Coordinated carbon exterior

Match the skirt finish to existing gloss carbon on the M4.

Side-by-side fitting

Position both extensions along the rockers to compare front and rear alignment.

Custom development

Define the parts in your order

Start with the exact vehicle and bumper. For a multi-part order, agree on the panels, sides and finish before sample approval.

Surface finish

Choose a finish for the visible surface

Select the appearance against a physical sample. The finish offered depends on the part and its substrate.

Gloss UV-resistant clear coat

Gloss clear coat

A reflective finish highlights the weave on exposed carbon.

Matte UV-resistant clear coat

Matte clear coat

Lower sheen softens reflections on exposed carbon surfaces.

Finishing & Brand Execution

Painted finish

For fiberglass bodywork, agree on the supplied surface and any final paint work before ordering.

Branding & supply options

  • Vehicle and bumper

    Match the sample to the chassis, body style and bumper outline shown in your photos.

  • Delivery scope

    Specify a single trim, a left and right pair, or an itemized kit. Identify each piece by its fitting position.

  • Mounting interface

    For a new design, supply the original clips, fixing points or bonding footprint as a reference.

  • Matched sets

    For pieces fitted together, agree on visible weave direction, sheen and the joints between panels.

Construction

Match the material to the part

An exposed carbon trim and a painted body panel serve different briefs. Use the selected SKU and sample to specify the construction.

Prepreg dry carbonFiberglass (FRP)Polyurethane (PU)ABS with a carbon option
Custom process

From vehicle reference to a packed order

A marked-up parts list and an approved sample give purchasing, fitting and packing teams the same reference.

Explore our capabilities
  1. 01

    Identify the vehicle

    Record the chassis, body style and bumper version from the original vehicle.

  2. 02

    Define the scope

    Mark each required panel, trim and fitting side on a photograph or drawing.

  3. 03

    Develop the sample

    Use the original part or 3D reference to establish edges, mounting interfaces and finish.

  4. 04

    Review the fit

    Compare the sample with the original bodywork and check the joints between adjacent pieces.

  5. 05

    Produce the batch

    Use the approved sample as the reference for forming, trimming and finishing.

  6. 06

    Inspect and pack

    Match the shipment to the parts list, identify left and right pieces and protect exposed edges.

IATF 16949

Company quality management certification

ISO 9001

Company quality management certification

150,000 m²

Self-owned manufacturing base

1,000 /day

Parts or sets, combined capacity

quality inspection of carbon fiber products

Body kit and trim inspection

We check the pieces against the approved sample and packing list, including surface appearance, finished edges, mounting features and the side marked on each paired part.

Quality control
Product questions

Fitment and ordering questions

Not finding your answer?

Tell us your application, requirements and target quantity.

Ask an engineer

Do the original rocker panels stay on the vehicle?

Yes. These extensions follow the original lower rocker contours.

Which part of the car should I photograph for a fit check?

Show the full sill from wheel arch to wheel arch, including any trim already fitted to it.

What is the minimum order?

The minimum order for an existing design is 10 pieces. For a new design, we agree the minimum order for the project. Your quotation identifies the parts supplied under each SKU.

What should I send for a quote?

Send the SKU or the parts you need, the vehicle year and body style, bumper photos, quantity and finish. For a new shape, include a drawing, 3D file or physical sample.

What is the lead time?

As a guide, projects that require design approval may take around 58 days from approval to delivery. Lead times may be shorter for existing products or when suitable tooling is available. We confirm the schedule in your quote.

How do I tell which parts are supplied together?

Use the parts list for the selected SKU. If you need to match parts from different listings, send both SKUs and the fitting positions so we can itemize the order.

Bulk & wholesale orders

Specify your M4 side skirt pair

Include the coupe’s rocker profile and the number of left and right sets required.

Free Technical Evaluation

Ask for a Free Feasibility Report

Our engineers will review your concept and provide materials, structure, and feasibility suggestions.