
Gloss UV clear coat
A reflective surface brings out the weave along the wheel arch or vent.

For the BMW G87 M2 Coupe with matching factory fender trim.
The replacement trim follows the G87 M2’s fender line. Its gloss clear coat leaves the carbon weave visible alongside the surrounding paintwork.
For a workshop order, compare the factory trim’s mounting layout and adjoining edges with the part photos. Identifying the component to be removed gives the installer a reference for checking alignment during fitting.
Specify trim for a car receiving replacement exterior parts.
Use the weave and gloss level to match nearby carbon details.
Show the 3×3 weave beside the paint and carbon finishes offered for a G87 build.
For a new design, we use the original bodywork to define which surfaces the part will cover and where it will attach.
Use a finish sample to match the exposed weave to nearby carbon parts. Available finishes depend on the selected design.

A reflective surface brings out the weave along the wheel arch or vent.

A low-sheen surface keeps the carbon pattern visible with softer reflections.
Match the panel edges to the hood, door and bumper, then locate the mounting points and wheel liner tabs.
Shape each section around the existing arch and check the joints with the bumper and the side skirt.
Use the original vent opening, clip positions and locating tabs to define the back of the trim.
Specify carton labels for your brand and identify each piece by side and fitting position.
For a new project, we can evaluate twill carbon laminate, prepreg dry carbon or a carbon fiber face bonded to an ABS base. See the specification table on each product page for its construction.
We use the approved sample as the reference for fit, surface appearance and packing.
Record the vehicle, year, body style and the original part or opening.
Mark the fixing points or bonding surfaces on the drawing or original part.
Form and trim the first part in the agreed material and finish.
Check panel gaps, arch joints or clip engagement on the matching bodywork.
Mold, trim and finish the parts to the approved sample.
Check the order contents and protect the panel edges and exposed carbon surfaces for shipment.
Company quality management certification
Company quality management certification
Self-owned manufacturing base
Parts or sets, combined capacity

We check mounting features and finished edges against the sample. For sets, we lay out the pieces by side and position to check the count, weave direction and sheen before packing.
Quality controlNo. This design takes the place of the compatible original trim.
Have a body shop check alignment at the mounting points and the gaps along the adjacent panels before completing installation.
The minimum order for an existing design is 10 pieces. For a new design, we agree the minimum quantity for the project.
Send the vehicle details, a photo of the original part, your quantity and preferred finish. For a new shape, include a drawing, 3D file or physical sample.
As a guide, projects that require design approval may take around 58 days from approval to delivery. Lead times may be shorter for existing products or when suitable tooling is available. We confirm the schedule in your quote.
A bonded kit fits over the existing wheel arch and relies on that panel for support. If the panel itself needs replacing, ask for a full replacement fender for your vehicle.
Tell us which factory trim you are replacing and how many pieces your workshop needs.
Our engineers will review your concept and provide materials, structure, and feasibility suggestions.