Automotive · Aerospace · Marine · Industrial

Empowering Your Project Success

Home » Products » Carbon Fiber Front Bumper Canards for Audi RS4 B9.5 Avant (2020-2024)
RS4 front bumper canards

Carbon Fiber Front Bumper Canards for Audi RS4 B9.5 Avant (2020-2024)

Existing design: 10 pieces minimum. Lead time is confirmed in the quote.

Autoclave-cured dry carbon front bumper canards shaped to the outer bumper contours of the 2020–2024 Audi RS4 B9.5 Avant.

Fitment2020–2024 Audi RS4 B9.5 Avant
PositionLeft and right front bumper sides
ConstructionAutoclave-cured prepreg carbon fiber
Weave2×2 twill
Overview

Front bumper canards for the B9.5 RS4 Avant

These 2020–2024 Audi RS4 B9.5 Avant carbon fiber front bumper canards follow the left and right bumper contours. They use autoclave-cured prepreg carbon fiber with a visible 2×2 twill. The clear coat is available in gloss or matte, and the canards are designed for adhesive mounting.

Check alignment on the B9.5 RS4 Avant bumper before approving a batch. For an RS4 trim range, coordinate the clear-coat finish with the other exterior parts and use the designated bumper reference in the installation instructions.

Applications

Audi RS4 front bumper canard applications

Audi Avant accessory catalogs

List the canards for the B9.5 RS4 Avant bumper within an Audi-specific exterior range.

Fitment workshop projects

Check the contour where the canard meets the outer bumper before final installation.

RS4 display vehicles

Select a finish that coordinates with the visible exterior carbon trim on an RS4 Avant.

Branded volume supply

Record the bumper application and finish in product labeling for distribution.

OEM / ODM

Carbon fiber front splitter options

Develop a carbon fiber front lip, corner splitter or front bumper canard around your bumper profile, installation points and order requirements.

Surface finish

Gloss and matte UV-protective clear coats

Choose the sheen of the UV-protective clear coat when confirming the finish for your order.

Gloss UV-protective clear coat

A reflective finish over the visible carbon weave.

Matte UV-protective clear coat

A low-sheen finish over the visible carbon weave.

Branding & supply options

  • Bumper profile and section layout

    Review whether the design calls for a continuous lip, a segmented front lip or separate parts at the bumper corners.

  • Mounting and clearances

    Confirm the contact surfaces and attachment points. For parts below the bumper, review the forward projection and ground clearance with the vehicle at its intended ride height.

  • Branding and packaging

    Discuss product identification for the range and packaging that protects long sections, corners and finished edges.

Materials

Carbon fiber layup and tooling options

We review the part geometry, mounting requirements and production volume before selecting a layup and tooling route.

Autoclave-cured dry carbonWet-layup carbon fiber
Custom process

Front splitter development and production

We check bumper shape, mounting points and clearance as part of front lip design.

Explore our capabilities
  1. 01

    Identify the vehicle and bumper

    Confirm the vehicle year, trim and bumper version using photos, drawings, scan data or an original part.

  2. 02

    Confirm the design and mounting

    Review the part profile, the contact surfaces and any specified mounting points. Check clearance for parts that extend below the bumper.

  3. 03

    Select the layup and tooling

    Agree on the material, finish and production process. Confirm whether the project uses existing tooling or needs a new mold.

  4. 04

    Trial-fit the first sample

    Check the bumper contour, edge alignment and attachment positions. Review left and right alignment for corner parts and section joints for multi-piece designs.

  5. 05

    Produce the approved batch

    Follow the approved part geometry, mounting configuration and surface finish during batch production.

  6. 06

    Inspect and pack for dispatch

    Check the finished parts against the order requirements and protect long edges, corners and mounting areas for transport.

IATF 16949

Company quality management certification

ISO 9001

Company quality management certification

150,000 m²

Self-owned manufacturing base

1,000 /day

Parts or sets, combined capacity

Front splitter inspection before dispatch

We check the part profile, finished edges, clear coat and specified mounting areas. On paired or segmented designs, we check the alignment of the corresponding sections. Packaging protects edges, corners and attachment points in transit.

Quality control
Product questions

Questions about the Audi RS4 B9.5 canards

Not finding your answer?

Tell us your application, requirements and target quantity.

Ask an engineer

Do these front bumper canards fit a standard Audi A4 or S4 bumper?

They are shaped for the 2020–2024 Audi RS4 B9.5 Avant bumper. Standard A4 and S4 front bumpers are outside this fitment.

Where do the canards sit on the RS4 front bumper?

They follow the outer contours on the left and right sides of the bumper.

What is the minimum order?

The minimum order is 10 pieces for existing models. Minimum quantities for a new development are agreed for each project.

What information should I send for a quote?

Send the vehicle model, year and trim, the bumper version, photos of the mounting area, the quantity and the finish. For a new design, include drawings, 3D data or an original part if available.

What is the delivery lead time?

Lead time for an existing model is confirmed with the quote. For new development or a change to the manufacturing process, delivery is 58 days from design approval.

What should I check before approving the installation?

Confirm the bumper version and the attachment points for the selected part. For parts that extend below the bumper, also check the available clearance at the intended ride height.

Bulk & wholesale orders

Request a quote for Audi RS4 front bumper canards

Include the RS4 Avant bumper details, clear-coat finish and quantity for batch supply.

Free Technical Evaluation

Ask for a Free Feasibility Report

Our engineers will review your concept and provide materials, structure, and feasibility suggestions.