Automotive · Aerospace · Marine · Industrial

Empowering Your Project Success

Home » Products » High-Quality BMW G87 M2 Coupe Dry Carbon Fiber Front Lip
G87 M2 front lip

High-Quality BMW G87 M2 Coupe Dry Carbon Fiber Front Lip

Existing design: 10 pieces minimum. Lead time is confirmed in the quote.

Gloss dry carbon front lip with 3×3 twill, shaped for the factory lower bumper of the BMW G87 M2 Coupe.

FitmentBMW G87 M2 Coupe
Mounting areaLower front bumper
MaterialDry carbon fiber
WeaveGloss 3×3 twill
Overview

A front lip for the factory G87 M2 bumper

The BMW G87 M2 Coupe carbon fiber front lip is shaped to follow the original lower front bumper. The dry carbon construction has a 3×3 twill under a gloss UV-protective clear coat. Vehicle-specific CNC tooling establishes the finished profile.

Check the center and outer contours against the target bumper during sample fitting. Workshops can review screw positions before installing the lip, and distributors can use the approved gloss sample as an appearance reference for repeat orders.

Applications

BMW G87 M2 front lip applications

M2 exterior catalogs

Specify the G87 M2 Coupe fitment separately from front lips for other BMW M models.

Workshop fitment

Check the lip along the center and ends of the bumper before securing it with screws.

Showroom M2 builds

Match the visible 3×3 twill and gloss to the display vehicle’s exterior trim.

Repeat wholesale orders

Retain a finish sample to compare the appearance on subsequent bulk orders.

OEM / ODM

Carbon fiber front splitter options

Develop a carbon fiber front lip, corner splitter or front bumper canard around your bumper profile, installation points and order requirements.

Surface finish

Gloss and matte UV-protective clear coats

Choose the sheen of the UV-protective clear coat when confirming the finish for your order.

Gloss UV-protective clear coat

A reflective finish over the visible carbon weave.

Matte UV-protective clear coat

A low-sheen finish over the visible carbon weave.

Branding & supply options

  • Bumper profile and section layout

    Review whether the design calls for a continuous lip, a segmented front lip or separate parts at the bumper corners.

  • Mounting and clearances

    Confirm the contact surfaces and attachment points. For parts below the bumper, review the forward projection and ground clearance with the vehicle at its intended ride height.

  • Branding and packaging

    Discuss product identification for the range and packaging that protects long sections, corners and finished edges.

Materials

Carbon fiber layup and tooling options

We review the part geometry, mounting requirements and production volume before selecting a layup and tooling route.

Autoclave-cured dry carbonWet-layup carbon fiber
Custom process

Front splitter development and production

We check bumper shape, mounting points and clearance as part of front lip design.

Explore our capabilities
  1. 01

    Identify the vehicle and bumper

    Confirm the vehicle year, trim and bumper version using photos, drawings, scan data or an original part.

  2. 02

    Confirm the design and mounting

    Review the part profile, the contact surfaces and any specified mounting points. Check clearance for parts that extend below the bumper.

  3. 03

    Select the layup and tooling

    Agree on the material, finish and production process. Confirm whether the project uses existing tooling or needs a new mold.

  4. 04

    Trial-fit the first sample

    Check the bumper contour, edge alignment and attachment positions. Review left and right alignment for corner parts and section joints for multi-piece designs.

  5. 05

    Produce the approved batch

    Follow the approved part geometry, mounting configuration and surface finish during batch production.

  6. 06

    Inspect and pack for dispatch

    Check the finished parts against the order requirements and protect long edges, corners and mounting areas for transport.

IATF 16949

Company quality management certification

ISO 9001

Company quality management certification

150,000 m²

Self-owned manufacturing base

1,000 /day

Parts or sets, combined capacity

Front splitter inspection before dispatch

We check the part profile, finished edges, clear coat and specified mounting areas. On paired or segmented designs, we check the alignment of the corresponding sections. Packaging protects edges, corners and attachment points in transit.

Quality control
Product questions

Questions about the G87 M2 front lip

Not finding your answer?

Tell us your application, requirements and target quantity.

Ask an engineer

What weave is visible on the G87 M2 front lip?

The dry carbon fiber has a visible 3×3 twill under a gloss clear coat.

What mechanical fastening does the G87 M2 front lip use?

The front lip is designed for mechanical screw fastening at the lower bumper.

What is the minimum order?

The minimum order is 10 pieces for existing models. Minimum quantities for a new development are agreed for each project.

What information should I send for a quote?

Send the vehicle model, year and trim, the bumper version, photos of the mounting area, the quantity and the finish. For a new design, include drawings, 3D data or an original part if available.

What is the delivery lead time?

Lead time for an existing model is confirmed with the quote. For new development or a change to the manufacturing process, delivery is 58 days from design approval.

What should I check before approving the installation?

Confirm the bumper version and the attachment points for the selected part. For parts that extend below the bumper, also check the available clearance at the intended ride height.

Bulk & wholesale orders

Request a quote for BMW G87 M2 front lips

Include the G87 M2 Coupe bumper details and order quantity so we can review your request.

Free Technical Evaluation

Ask for a Free Feasibility Report

Our engineers will review your concept and provide materials, structure, and feasibility suggestions.