
Gloss UV-protective clear coat
A reflective finish over the visible carbon weave.

A 3K 2×2 twill lip for compatible M Sport front bumpers on the 2018–2021 BMW 8 Series G14, G15 and G16.
This BMW 8 Series G14 G15 G16 M Sport carbon fiber front lip follows the lower fascia of compatible 2018–2021 models. The fitment covers G14 Convertible, G15 Coupe and G16 Gran Coupe configurations equipped with the matching M Sport front bumper.
The molded CFRP has a visible 3K 2×2 twill under gloss or matte UV-protective clear coat. For a multi-body-style product range, identify the chassis and fascia in the stock listing and verify the lower contour during sample fitting.
Organize compatible applications by G14 Convertible, G15 Coupe and G16 Gran Coupe.
Use the existing fascia as the reference for the lower trim edge during fitting.
Specify a clear-coat sheen to coordinate the visible 3K twill with companion exterior parts.
Identify the chassis and front bumper in the program before replenishing branded stock.
Develop a carbon fiber front lip, corner splitter or front bumper canard around your bumper profile, installation points and order requirements.
Choose the sheen of the UV-protective clear coat when confirming the finish for your order.

A reflective finish over the visible carbon weave.

A low-sheen finish over the visible carbon weave.
Review whether the design calls for a continuous lip, a segmented front lip or separate parts at the bumper corners.
Confirm the contact surfaces and attachment points. For parts below the bumper, review the forward projection and ground clearance with the vehicle at its intended ride height.
Discuss product identification for the range and packaging that protects long sections, corners and finished edges.
We review the part geometry, mounting requirements and production volume before selecting a layup and tooling route.
We check bumper shape, mounting points and clearance as part of front lip design.
Confirm the vehicle year, trim and bumper version using photos, drawings, scan data or an original part.
Review the part profile, the contact surfaces and any specified mounting points. Check clearance for parts that extend below the bumper.
Agree on the material, finish and production process. Confirm whether the project uses existing tooling or needs a new mold.
Check the bumper contour, edge alignment and attachment positions. Review left and right alignment for corner parts and section joints for multi-piece designs.
Follow the approved part geometry, mounting configuration and surface finish during batch production.
Check the finished parts against the order requirements and protect long edges, corners and mounting areas for transport.
Company quality management certification
Company quality management certification
Self-owned manufacturing base
Parts or sets, combined capacity

We check the part profile, finished edges, clear coat and specified mounting areas. On paired or segmented designs, we check the alignment of the corresponding sections. Packaging protects edges, corners and attachment points in transit.
Quality controlIt covers compatible 2018–2021 G14 Convertible, G15 Coupe and G16 Gran Coupe applications with the M Sport bumper.
The lip follows the compatible 8 Series M Sport fascia. The M8 uses a different lower profile.
The minimum order is 10 pieces for existing models. Minimum quantities for a new development are agreed for each project.
Send the vehicle model, year and trim, the bumper version, photos of the mounting area, the quantity and the finish. For a new design, include drawings, 3D data or an original part if available.
Lead time for an existing model is confirmed with the quote. For new development or a change to the manufacturing process, delivery is 58 days from design approval.
Confirm the bumper version and the attachment points for the selected part. For parts that extend below the bumper, also check the available clearance at the intended ride height.
Send the chassis code, body style and preferred finish when requesting a quote for this front lip.
Our engineers will review your concept and provide materials, structure, and feasibility suggestions.