
Gloss clear coat
A reflective UV-resistant clear coat keeps the carbon weave visible across the lid.

Retain the sedan’s original deck contour with a complete replacement panel in exposed twill carbon.
The 2014–2017 Infiniti Q50 carbon fiber trunk lid follows the shape of the four-door sedan’s factory panel. The molded carbon fiber shell carries a visible 3K 2×2 twill and replaces the entire original lid.
During fitting, transfer the original hinges, latch and weatherstrip, then set the panel alignment. If the car has a spoiler, camera or third brake light, send photos of the existing openings so we can check the provision for each item.
Keep the factory-style deck profile on a four-door Q50 build.
Use the original lid as the reference for hinges, latch and seal positions.
Agree the opening pattern for a specific car before the panel is prepared.
Use a separate order line for each body style, rear-edge profile and finish.
Ask which finish is available for the selected lid. A reference photo helps when matching other exposed carbon panels.

A reflective UV-resistant clear coat keeps the carbon weave visible across the lid.

A low-sheen UV-resistant clear coat shows the weave with a softer reflection.
For a BMW Coupe order, mark the curved or angular edge on a side-view photo and include the matching SKU.
Identify the original hardware you intend to transfer. Show any spoiler, camera or emblem openings that the panel must accommodate.
Supply your part number or label artwork so the receiving team can identify each lid without unpacking it.
Tell us how the panels will travel and whether each lid needs its own retail carton. We confirm the packing arrangement in the quote.
The BMW and Infiniti lids feature a visible twill weave. The Mustang Fastback lid uses autoclave-cured prepreg.
For a new lid design, the original panel or drawings establish the outer profile and the underside mounting layout.
Supply the model, chassis, model year and body style so we can select the correct reference panel.
Compare the trailing edge, side edges and inner frame with the sample or drawings.
Mark hinge and latch locations and agree which accessory openings the ordered configuration needs.
Check fit on the intended body and review the surface finish before approving the order.
Form, trim and finish the panels to the approved construction and rear-edge profile.
Verify the finished lids against the order, then protect the visible faces, corners and mounting areas for transport.
Certified production quality system
Certified quality management
Self-owned manufacturing base
Parts or sets, combined capacity

We compare the panel edges, surface finish and specified mounting areas with the approved sample, then check that the packing supports the panel and protects its corners.
Quality controlYes. The panel is molded to the original contours of the 2014–2017 four-door sedan and uses its factory mounting layout.
The hole pattern depends on the configuration. Identify the badge and any spoiler you want to reuse before the lid is prepared.
Existing trunk lid designs start at 10 pieces. For a new design, we agree the minimum quantity for the project.
Send an original lid or drawings showing both faces, the intended body style and the quantity. Indicate which fittings and openings must match your reference panel.
As a guide, projects that require design approval may take around 58 days from approval to delivery. Lead times may be shorter for existing products or when suitable tooling is available. We confirm the schedule in your quote.
Send your label artwork and the part number for each lid. We can include private-label packing in the quotation and match the carton labels to the packing list.
Send the model year, quantity and photos of any badges, spoiler or camera to be transferred.
Our engineers will review your concept and provide materials, structure, and feasibility suggestions.