
Gloss clear coat
A reflective UV-resistant clear coat keeps the carbon weave visible across the lid.

The squarer trailing edge creates a sharper line between the deck surface and the rear face.
This full replacement panel fits the 2021–2023 BMW G22 430i Coupe, G22 M440i Coupe and G82 M4 Coupe. The crease at its trailing edge gives the lid a more angular profile than the curved-edge JC-KF1809. An inner frame supports the visible 3K 2×2 twill outer skin.
Check the camera and third brake light provisions against the original coupe before moving the hardware across. The G26 Gran Coupe and G23 Convertible are outside the fitment range.
Choose the pronounced crease for a squarer deck profile.
Trial-fit the replacement on the original hinges and check latch engagement before final alignment.
Label the angular panel JC-KF1810 when displaying it alongside the curved version.
Use a separate order line for each body style, rear-edge profile and finish.
Ask which finish is available for the selected lid. A reference photo helps when matching other exposed carbon panels.

A reflective UV-resistant clear coat keeps the carbon weave visible across the lid.

A low-sheen UV-resistant clear coat shows the weave with a softer reflection.
For a BMW Coupe order, mark the curved or angular edge on a side-view photo and include the matching SKU.
Identify the original hardware you intend to transfer. Show any spoiler, camera or emblem openings that the panel must accommodate.
Supply your part number or label artwork so the receiving team can identify each lid without unpacking it.
Tell us how the panels will travel and whether each lid needs its own retail carton. We confirm the packing arrangement in the quote.
The BMW and Infiniti lids feature a visible twill weave. The Mustang Fastback lid uses autoclave-cured prepreg.
For a new lid design, the original panel or drawings establish the outer profile and the underside mounting layout.
Supply the model, chassis, model year and body style so we can select the correct reference panel.
Compare the trailing edge, side edges and inner frame with the sample or drawings.
Mark hinge and latch locations and agree which accessory openings the ordered configuration needs.
Check fit on the intended body and review the surface finish before approving the order.
Form, trim and finish the panels to the approved construction and rear-edge profile.
Verify the finished lids against the order, then protect the visible faces, corners and mounting areas for transport.
Certified production quality system
Certified quality management
Self-owned manufacturing base
Parts or sets, combined capacity

We compare the panel edges, surface finish and specified mounting areas with the approved sample, then check that the packing supports the panel and protects its corners.
Quality controlUse JC-KF1810 and select the angular rear edge. JC-KF1809 is the separate curved-edge version.
For an equipped 2021–2023 G22 or G82 Coupe, send photos of the original openings and mountings. We check them against this lid before quoting.
Existing trunk lid designs start at 10 pieces. For a new design, we agree the minimum quantity for the project.
Send an original lid or drawings showing both faces, the intended body style and the quantity. Indicate which fittings and openings must match your reference panel.
As a guide, projects that require design approval may take around 58 days from approval to delivery. Lead times may be shorter for existing products or when suitable tooling is available. We confirm the schedule in your quote.
Send your label artwork and the part number for each lid. We can include private-label packing in the quotation and match the carton labels to the packing list.
Quote JC-KF1810 and include a rear view of the coupe with its existing equipment.
Our engineers will review your concept and provide materials, structure, and feasibility suggestions.