Automotive · Aerospace · Marine · Industrial

Empowering Your Project Success

Home » Products » BMW Z4 G29 M40i M-Sport 2019-2024 Real Prepreg Dry Carbon Fiber Front Bumper Splitter
Front bumper corner splitters

BMW Z4 G29 M40i M-Sport 2019-2024 Real Prepreg Dry Carbon Fiber Front Bumper Splitter

Existing design: 10 pieces minimum. Lead time is confirmed in the quote.

Gloss prepreg dry carbon splitters shaped for the front bumper corners of the 2019–2024 BMW Z4 G29 M40i M Sport.

Fitment2019–2024 BMW Z4 G29 M40i M Sport
PositionLeft and right front bumper corners
Weave3×3 carbon fiber twill
MountingBolt-on
Overview

Corner splitters for the Z4 G29 M Sport bumper

This BMW Z4 G29 M40i M Sport carbon fiber front splitter design follows the left and right lower bumper corners on 2019–2024 models. It uses prepreg dry carbon fiber with a visible 3×3 twill under a gloss UV-protective clear coat. The corner pieces are designed for bolt-on mounting.

Before a volume order, trial-fit a sample on the intended M Sport bumper and check alignment at both corners. For a branded Z4 range, share the bumper version, order quantity and packaging requirements when requesting a quote.

Applications

Supply applications for the Z4 corner splitters

BMW roadster catalogs

List corner splitters for the G29 M40i M Sport bumper.

Workshop installs

Check edge alignment at each corner before fastening the part.

Dealer display builds

Coordinate the gloss 3×3 twill with the exterior trim on a Z4 display car.

Private-label supply

Plan labels and packaging around the Z4 corner splitter design.

OEM / ODM

Carbon fiber front splitter options

Develop a carbon fiber front lip, corner splitter or front bumper canard around your bumper profile, installation points and order requirements.

Surface finish

Gloss and matte UV-protective clear coats

Choose the sheen of the UV-protective clear coat when confirming the finish for your order.

Gloss UV-resistant clear coat

Gloss UV-protective clear coat

A reflective finish over the visible carbon weave.

Matte UV-resistant clear coat

Matte UV-protective clear coat

A low-sheen finish over the visible carbon weave.

Branding & supply options

  • Bumper profile and section layout

    Review whether the design calls for a continuous lip, a segmented front lip or separate parts at the bumper corners.

  • Mounting and clearances

    Confirm the contact surfaces and attachment points. For parts below the bumper, review the forward projection and ground clearance with the vehicle at its intended ride height.

  • Branding and packaging

    Discuss product identification for the range and packaging that protects long sections, corners and finished edges.

Materials

Carbon fiber layup and tooling options

We review the part geometry, mounting requirements and production volume before selecting a layup and tooling route.

Autoclave-cured dry carbonWet-layup carbon fiber
Custom process

Front splitter development and production

We check bumper shape, mounting points and clearance as part of front lip design.

Explore our capabilities
  1. 01

    Identify the vehicle and bumper

    Confirm the vehicle year, trim and bumper version using photos, drawings, scan data or an original part.

  2. 02

    Confirm the design and mounting

    Review the part profile, the contact surfaces and any specified mounting points. Check clearance for parts that extend below the bumper.

  3. 03

    Select the layup and tooling

    Agree on the material, finish and production process. Confirm whether the project uses existing tooling or needs a new mold.

  4. 04

    Trial-fit the first sample

    Check the bumper contour, edge alignment and attachment positions. Review left and right alignment for corner parts and section joints for multi-piece designs.

  5. 05

    Produce the approved batch

    Follow the approved part geometry, mounting configuration and surface finish during batch production.

  6. 06

    Inspect and pack for dispatch

    Check the finished parts against the order requirements and protect long edges, corners and mounting areas for transport.

IATF 16949

Company quality management certification

ISO 9001

Company quality management certification

150,000 m²

Self-owned manufacturing base

1,000 /day

Parts or sets, combined capacity

Automated Quality Inspection

Front splitter inspection before dispatch

We check the part profile, finished edges, clear coat and specified mounting areas. On paired or segmented designs, we check the alignment of the corresponding sections. Packaging protects edges, corners and attachment points in transit.

Quality control
Product questions

Questions about the Z4 G29 corner splitters

Not finding your answer?

Tell us your application, requirements and target quantity.

Ask an engineer

Which Z4 bumper is this splitter design shaped for?

It follows the M Sport front bumper on the 2019–2024 BMW Z4 G29 M40i.

How are the Z4 corner splitters mounted?

They are designed for bolt-on mounting at the left and right lower bumper corners.

What is the minimum order?

The minimum order is 10 pieces for existing models. Minimum quantities for a new development are agreed for each project.

What information should I send for a quote?

Send the vehicle model, year and trim, the bumper version, photos of the mounting area, the quantity and the finish. For a new design, include drawings, 3D data or an original part if available.

What is the delivery lead time?

Lead time for an existing model is confirmed with the quote. For new development or a change to the manufacturing process, delivery is 58 days from design approval.

What should I check before approving the installation?

Confirm the bumper version and the attachment points for the selected part. For parts that extend below the bumper, also check the available clearance at the intended ride height.

Bulk & wholesale orders

Request a quote for Z4 G29 corner splitters

Share your M Sport bumper details and order quantity so we can review fitment and packaging.

Free Technical Evaluation

Ask for a Free Feasibility Report

Our engineers will review your concept and provide materials, structure, and feasibility suggestions.