
Gloss UV-protective clear coat
A reflective finish over the visible carbon weave.

A low-profile prepreg dry carbon lip for the 2024+ BMW 5 Series G60 with M Sport bumper.
This 2024+ BMW 5 Series G60 carbon fiber front lip fits along the lower fascia of the compatible M Sport front bumper. Its low-profile shape follows the original bumper line. The lip uses prepreg CFRP cured in an autoclave.
Specify matte or gloss UV-protective clear coat to suit the exterior parts range. For recurring orders, trial-fit a sample to verify the contour and concealed contact areas of the intended G60 M Sport fascia.
Catalog the lip for the 2024+ BMW 5 Series G60 with M Sport bumper.
Align the low-profile extension to the G60 lower fascia before fixing it.
Choose gloss or matte clear coat to align the lip with other exterior parts in a G60 program.
Specify the low-profile trim for a 5 Series demonstration or delivery build.
Develop a carbon fiber front lip, corner splitter or front bumper canard around your bumper profile, installation points and order requirements.
Choose the sheen of the UV-protective clear coat when confirming the finish for your order.

A reflective finish over the visible carbon weave.

A low-sheen finish over the visible carbon weave.
Review whether the design calls for a continuous lip, a segmented front lip or separate parts at the bumper corners.
Confirm the contact surfaces and attachment points. For parts below the bumper, review the forward projection and ground clearance with the vehicle at its intended ride height.
Discuss product identification for the range and packaging that protects long sections, corners and finished edges.
We review the part geometry, mounting requirements and production volume before selecting a layup and tooling route.
We check bumper shape, mounting points and clearance as part of front lip design.
Confirm the vehicle year, trim and bumper version using photos, drawings, scan data or an original part.
Review the part profile, the contact surfaces and any specified mounting points. Check clearance for parts that extend below the bumper.
Agree on the material, finish and production process. Confirm whether the project uses existing tooling or needs a new mold.
Check the bumper contour, edge alignment and attachment positions. Review left and right alignment for corner parts and section joints for multi-piece designs.
Follow the approved part geometry, mounting configuration and surface finish during batch production.
Check the finished parts against the order requirements and protect long edges, corners and mounting areas for transport.
Company quality management certification
Company quality management certification
Self-owned manufacturing base
Parts or sets, combined capacity

We check the part profile, finished edges, clear coat and specified mounting areas. On paired or segmented designs, we check the alignment of the corresponding sections. Packaging protects edges, corners and attachment points in transit.
Quality controlIt follows the lower fascia of the compatible M Sport front bumper on the 2024+ BMW 5 Series G60.
It is made from prepreg CFRP cured in an autoclave.
The minimum order is 10 pieces for existing models. Minimum quantities for a new development are agreed for each project.
Send the vehicle model, year and trim, the bumper version, photos of the mounting area, the quantity and the finish. For a new design, include drawings, 3D data or an original part if available.
Lead time for an existing model is confirmed with the quote. For new development or a change to the manufacturing process, delivery is 58 days from design approval.
Confirm the bumper version and the attachment points for the selected part. For parts that extend below the bumper, also check the available clearance at the intended ride height.
Share the BMW G60 bumper profile, finish and quantity for your M Sport application.
Our engineers will review your concept and provide materials, structure, and feasibility suggestions.