
Weave direction
Mark the preferred direction on the sample where two pieces meet.

Match the 2024 G60 dashboard and center console to the ten-piece layout shown.
The BMW G60 dry carbon interior trim kit combines long dashboard accents with shaped trim for the center console. The carbon pieces sit over the factory trim. The console opening follows the original controls, and the longer sections follow the lines of the dashboard.
When preparing an order, mark the required sections on one cockpit photo. Include a close-up of any ambient-light strip that runs along a proposed edge. A numbered layout lets the buyer and installer identify the same pieces before the order is packed.
Show the dash and console together in a matched carbon finish.
Cover compatible original trim while retaining the factory panels.
Group cars by console layout before specifying each kit.
Mark the fitting positions on photos of the original interior. We can use the same marked views to identify the pieces on your quotation.
Use the original interior or an approved sample as the reference for the visible face.

Mark the preferred direction on the sample where two pieces meet.

Compare the sample beside the surrounding trim in the cabin before approving the finish.
Show the screen surround, selector and switch openings. Include the steering side when the panel follows the dash or console layout.
Identify the seat type and mark the seat back, headrest opening or side switch panel you want to trim.
Mark each opening or door on an overview photo, then add a close-up of its outline.
List the pieces by fitting position. For handed parts, specify the left and right pieces and the number of each.
Identify which visible surfaces need to match. For a repeat order, use the same panel reference and finish sample.
Use one fitting reference and one numbered list of pieces throughout the order.
Record the chassis, model year and the original panel or seat version.
Mark each required piece and its orientation on cabin photos.
Agree which pieces cover an existing panel and which, if applicable, replace one. Specify the visible material.
Compare outlines, openings and visible edges with the original panel and approve the finish.
Produce to the agreed sample and keep different panel layouts under separate order references.
Check handed pieces and opening positions, then count the packed parts against the order list.
Certified production quality system
Certified quality management
Self-owned manufacturing base
Parts or sets, combined capacity

We check the visible weave and finish, compare openings and edges with the approved sample, and verify each packing position against the parts list.
Quality controlThe car shown is left-hand drive. Send a straight-on photo of the right-hand-drive dashboard and console so we can compare the contours before quoting.
Show the light strip and the trim edge alongside it. We check where each overlay ends so the selected pieces leave the light strip clear.
The minimum for an existing design is 10 pieces. For a new design, we agree the minimum quantity for the project. The quotation identifies the pieces supplied with each kit.
Send the SKU, chassis code, model year and photos of the original fitting area. For dashboard and console parts, show the steering side and the screen and switch layout.
As a guide, projects that require design approval may take around 58 days from approval to delivery. Lead times may be shorter for existing products or when suitable tooling is available. We confirm the schedule in your quote.
Ask for an itemized packing list with each piece identified by its fitting position. If the parts are handed, the list should show the left and right quantities separately.
Send the dashboard and console photos with the finish and quantity you need.
Our engineers will review your concept and provide materials, structure, and feasibility suggestions.