Automotive · Aerospace · Marine · Industrial

Empowering Your Project Success

Home » Products » Tesla Model Y 2019-2024 Real Carbon Fiber Front Lip
Model Y front lip

Tesla Model Y 2019-2024 Real Carbon Fiber Front Lip

Existing design: 10 pieces minimum. Lead time is confirmed in the quote.

Carbon fiber front lip contoured to the lower factory bumper on compatible 2019–2024 Tesla Model Y vehicles.

FitmentTesla Model Y, 2019–2024
PositionLower front bumper
ConstructionCarbon fiber reinforced polymer
Finish optionsGloss or matte UV-protective clear coat
Overview

Lower bumper profile for the Model Y

This 2019–2024 Tesla Model Y carbon fiber front lip follows the lower contour of the factory front bumper. It is molded in carbon fiber reinforced polymer and offered with a gloss or matte UV-protective clear coat. Check the bumper profile against the selected lip before approving fitment.

For a Model Y accessory range, match the finish to the other exterior parts listed alongside it. Share a bumper reference for the target vehicle so the same profile is used for sampling and repeat orders.

Applications

Model Y front lip applications

EV accessory catalogs

List the lip by Model Y bumper profile and finish so dealers can identify the intended configuration.

Installer stock programs

Group orders by bumper profile for installation teams working on different Model Y vehicles.

Vehicle display builds

Coordinate the lip finish with adjacent carbon trim on a Model Y display vehicle.

Private-label supply

Match product labeling and pack specifications to an existing Model Y accessory line.

OEM / ODM

Carbon fiber front splitter options

Develop a carbon fiber front lip, corner splitter or front bumper canard around your bumper profile, installation points and order requirements.

Surface finish

Gloss and matte UV-protective clear coats

Choose the sheen of the UV-protective clear coat when confirming the finish for your order.

Gloss UV-resistant clear coat

Gloss UV-protective clear coat

A reflective finish over the visible carbon weave.

Matte UV-resistant clear coat

Matte UV-protective clear coat

A low-sheen finish over the visible carbon weave.

Branding & supply options

  • Bumper profile and section layout

    Review whether the design calls for a continuous lip, a segmented front lip or separate parts at the bumper corners.

  • Mounting and clearances

    Confirm the contact surfaces and attachment points. For parts below the bumper, review the forward projection and ground clearance with the vehicle at its intended ride height.

  • Branding and packaging

    Discuss product identification for the range and packaging that protects long sections, corners and finished edges.

Materials

Carbon fiber layup and tooling options

We review the part geometry, mounting requirements and production volume before selecting a layup and tooling route.

Autoclave-cured dry carbonWet-layup carbon fiber
Custom process

Front splitter development and production

We check bumper shape, mounting points and clearance as part of front lip design.

Explore our capabilities
  1. 01

    Identify the vehicle and bumper

    Confirm the vehicle year, trim and bumper version using photos, drawings, scan data or an original part.

  2. 02

    Confirm the design and mounting

    Review the part profile, the contact surfaces and any specified mounting points. Check clearance for parts that extend below the bumper.

  3. 03

    Select the layup and tooling

    Agree on the material, finish and production process. Confirm whether the project uses existing tooling or needs a new mold.

  4. 04

    Trial-fit the first sample

    Check the bumper contour, edge alignment and attachment positions. Review left and right alignment for corner parts and section joints for multi-piece designs.

  5. 05

    Produce the approved batch

    Follow the approved part geometry, mounting configuration and surface finish during batch production.

  6. 06

    Inspect and pack for dispatch

    Check the finished parts against the order requirements and protect long edges, corners and mounting areas for transport.

IATF 16949

Company quality management certification

ISO 9001

Company quality management certification

150,000 m²

Self-owned manufacturing base

1,000 /day

Parts or sets, combined capacity

Automated Quality Inspection

Front splitter inspection before dispatch

We check the part profile, finished edges, clear coat and specified mounting areas. On paired or segmented designs, we check the alignment of the corresponding sections. Packaging protects edges, corners and attachment points in transit.

Quality control
Product questions

Questions about the Model Y front lip

Not finding your answer?

Tell us your application, requirements and target quantity.

Ask an engineer

Where does the Model Y front lip sit?

It follows the lower edge of the factory front bumper.

What clear-coat finishes can this Model Y lip be ordered in?

Gloss or matte UV-protective clear coat can be specified.

What is the minimum order?

The minimum order is 10 pieces for existing models. Minimum quantities for a new development are agreed for each project.

What information should I send for a quote?

Send the vehicle model, year and trim, the bumper version, photos of the mounting area, the quantity and the finish. For a new design, include drawings, 3D data or an original part if available.

What is the delivery lead time?

Lead time for an existing model is confirmed with the quote. For new development or a change to the manufacturing process, delivery is 58 days from design approval.

What should I check before approving the installation?

Confirm the bumper version and the attachment points for the selected part. For parts that extend below the bumper, also check the available clearance at the intended ride height.

Bulk & wholesale orders

Request a quote for Tesla Model Y front lips

Share the bumper profile, finish and order quantity for your Model Y program.

Free Technical Evaluation

Ask for a Free Feasibility Report

Our engineers will review your concept and provide materials, structure, and feasibility suggestions.