
Gloss UV-protective clear coat
A reflective finish over the visible carbon weave.

A sectional carbon fiber front lip shaped around the Mercedes-Benz GLS63 AMG X167 factory lower valance.
This Mercedes-Benz GLS63 AMG X167 carbon fiber front lip follows the factory AMG lower valance. Its center and side profiles track the shape of the original bumper. The lip is molded in CFRP with a visible 2×2 twill.
For an X167 accessory range, trial-fit a sample to check how the sections meet along the valance before committing to batch supply. Concealed mechanical fastening sits below the bodywork, and buyers can specify a gloss or matte UV-protective clear coat for their range.
Add a lower-valance front lip for the X167 GLS63 AMG bumper.
Lay out the center and side profiles before aligning the lip against the factory bumper.
Coordinate the visible carbon twill with other exterior trim on a GLS63 display vehicle.
Specify product labeling and packaging that supports the finished edges in transit.
Develop a carbon fiber front lip, corner splitter or front bumper canard around your bumper profile, installation points and order requirements.
Choose the sheen of the UV-protective clear coat when confirming the finish for your order.

A reflective finish over the visible carbon weave.

A low-sheen finish over the visible carbon weave.
Review whether the design calls for a continuous lip, a segmented front lip or separate parts at the bumper corners.
Confirm the contact surfaces and attachment points. For parts below the bumper, review the forward projection and ground clearance with the vehicle at its intended ride height.
Discuss product identification for the range and packaging that protects long sections, corners and finished edges.
We review the part geometry, mounting requirements and production volume before selecting a layup and tooling route.
We check bumper shape, mounting points and clearance as part of front lip design.
Confirm the vehicle year, trim and bumper version using photos, drawings, scan data or an original part.
Review the part profile, the contact surfaces and any specified mounting points. Check clearance for parts that extend below the bumper.
Agree on the material, finish and production process. Confirm whether the project uses existing tooling or needs a new mold.
Check the bumper contour, edge alignment and attachment positions. Review left and right alignment for corner parts and section joints for multi-piece designs.
Follow the approved part geometry, mounting configuration and surface finish during batch production.
Check the finished parts against the order requirements and protect long edges, corners and mounting areas for transport.
Company quality management certification
Company quality management certification
Self-owned manufacturing base
Parts or sets, combined capacity

We check the part profile, finished edges, clear coat and specified mounting areas. On paired or segmented designs, we check the alignment of the corresponding sections. Packaging protects edges, corners and attachment points in transit.
Quality controlThe lip traces the lower valance of the GLS63 AMG X167 front bumper.
They sit underneath the valance, concealed from the painted front face.
The minimum order is 10 pieces for existing models. Minimum quantities for a new development are agreed for each project.
Send the vehicle model, year and trim, the bumper version, photos of the mounting area, the quantity and the finish. For a new design, include drawings, 3D data or an original part if available.
Lead time for an existing model is confirmed with the quote. For new development or a change to the manufacturing process, delivery is 58 days from design approval.
Confirm the bumper version and the attachment points for the selected part. For parts that extend below the bumper, also check the available clearance at the intended ride height.
Share the X167 bumper configuration, preferred clear coat and quantity for your program.
Our engineers will review your concept and provide materials, structure, and feasibility suggestions.