
Gloss UV-protective clear coat
A reflective finish over the visible carbon weave.

A carbon fiber front lip for the lower edge of the 2024 Mercedes-Benz GLE C167 Coupe AMG-Line bumper.
This 2024 Mercedes-Benz GLE C167 Coupe carbon fiber front lip follows the lower edge of the facelift AMG-Line fascia. It is molded in CFRP with a visible 2×2 twill and is offered with gloss or matte UV-protective clear coat.
Hidden undertray fasteners attach the lip below the painted fascia. For batch orders, check a sample against the intended 2024 AMG-Line bumper so the stock specification matches the lower contour used in the workshop.
Stock the lip against the 2024 C167 Coupe AMG-Line bumper specification.
Align the part to the facelift bumper’s lower edge during a workshop installation.
Match the clear-coat sheen to the visible carbon fiber trim on a 2024 AMG-Line display vehicle.
Use the agreed fascia profile and finish when replenishing the product line.
Develop a carbon fiber front lip, corner splitter or front bumper canard around your bumper profile, installation points and order requirements.
Choose the sheen of the UV-protective clear coat when confirming the finish for your order.

A reflective finish over the visible carbon weave.

A low-sheen finish over the visible carbon weave.
Review whether the design calls for a continuous lip, a segmented front lip or separate parts at the bumper corners.
Confirm the contact surfaces and attachment points. For parts below the bumper, review the forward projection and ground clearance with the vehicle at its intended ride height.
Discuss product identification for the range and packaging that protects long sections, corners and finished edges.
We review the part geometry, mounting requirements and production volume before selecting a layup and tooling route.
We check bumper shape, mounting points and clearance as part of front lip design.
Confirm the vehicle year, trim and bumper version using photos, drawings, scan data or an original part.
Review the part profile, the contact surfaces and any specified mounting points. Check clearance for parts that extend below the bumper.
Agree on the material, finish and production process. Confirm whether the project uses existing tooling or needs a new mold.
Check the bumper contour, edge alignment and attachment positions. Review left and right alignment for corner parts and section joints for multi-piece designs.
Follow the approved part geometry, mounting configuration and surface finish during batch production.
Check the finished parts against the order requirements and protect long edges, corners and mounting areas for transport.
Company quality management certification
Company quality management certification
Self-owned manufacturing base
Parts or sets, combined capacity

We check the part profile, finished edges, clear coat and specified mounting areas. On paired or segmented designs, we check the alignment of the corresponding sections. Packaging protects edges, corners and attachment points in transit.
Quality controlThis profile follows the 2024 C167 Coupe AMG-Line fascia. The GLE 53 and GLE 63 bumpers use different profiles.
The outer surface shows a 2×2 carbon fiber twill under the clear coat.
The minimum order is 10 pieces for existing models. Minimum quantities for a new development are agreed for each project.
Send the vehicle model, year and trim, the bumper version, photos of the mounting area, the quantity and the finish. For a new design, include drawings, 3D data or an original part if available.
Lead time for an existing model is confirmed with the quote. For new development or a change to the manufacturing process, delivery is 58 days from design approval.
Confirm the bumper version and the attachment points for the selected part. For parts that extend below the bumper, also check the available clearance at the intended ride height.
Share the 2024 AMG-Line bumper configuration, requested finish and quantity.
Our engineers will review your concept and provide materials, structure, and feasibility suggestions.